Concrete Lid P5 — Class A

  • Precast concrete P5 lid, Class A
  • Embossed for Electrical, Communications, NBN, Optus, Vocus, TPG, VicTrack or Railway Signal — or Plain
  • Made in Australia
SKU N/A Category

Description

Concrete Lid P5 — Class A

A pit is a small underground chamber that houses cables, conduit or infrastructure at an access point, with a lid fitted flush at ground level to cover it. P5 refers to a standard pit and lid size used across telecommunications, electrical, rail and other infrastructure projects in Australia.

This P5 concrete lid carries a Class A load rating to AS/NZS 3996, suited to pedestrian access points. An embossing on top identifies the network or authority it’s for, or it comes plain with no marking. Steel-reinforced concrete gives it a minimum 40MPa strength rating.

Key features & benefits

  • Steel-reinforced concrete, minimum 40MPa compressive strength
  • Class A load rating to AS/NZS 3996 — for pedestrian-accessible areas, not suited to vehicles
  • Made in Australia
  • More cost-effective than composite alternatives, though heavier to handle and more prone to chipping at the edges under impact — see our Stronglite composite range for a lighter, more impact-resistant option

Applications

This lid secures underground P5 pit access across a range of networks and authorities. Select the embossing that matches your project. Options include Electrical, Communications, NBN, Optus, Vocus, TPG, VicTrack and Railway Signal, or Plain if you need no marking. The embossing only shows which network or authority the lid suits on site. It doesn’t change the material, dimensions or load rating — those stay the same across every option. Check your project specification for the correct embossing before ordering.

Dimensions

Length Width Depth Weight Class
648mm 398mm 50mm 31kg A

Dimensions and weight are the same across all embossing options. Approximate — actual product dimensions may vary. If critical, please contact us to verify before use.

Standards

Class Typical Use Nominal Wheel Loading Serviceability Design Load Ultimate Limit State Design
A Pedestrian areas only — not suited to vehicles (e.g. residential backyards, walkways) 330kg 6.7kN 10kN

Manufactured to a Class A load rating under AS/NZS 3996:2019.

This lid is Class A — for people and bikes only, on footpaths, walkways and landscaped areas closed to vehicles. AS 3996 directs that where there’s any doubt about which class a site needs, the stronger class should be chosen. See our Load Class Guide for the full class range, from Class A through to Class G, or contact us before ordering if you’re unsure.

FAQs

What’s the difference between the embossing options?

Only the marking on the top of the lid — the material, size, weight and load rating are identical across every version. Choose the embossing that matches your project’s network or authority.

What does “Plain” mean?

No embossing at all — used where no specific network marking is required.

What if my pit is in a driveway or an area vehicles might cross?

Class A is for pedestrian areas only. If vehicles will ever cross the pit, a higher class is required — talk to us about our Stronglite composite range, or see our Load Class Guide for the full class range.

Not sure which class I need?

Selecting the correct class is the designer’s responsibility, and AS 3996 directs that the stronger class be chosen where there’s any doubt. Contact us before ordering if you’re unsure.

Can this lid be locked?

No — standard concrete lids rely on their weight to stay in place, not a locking mechanism. If you need a lockable option, talk to us about our Stronglite composite range.